Palletizing means stacking cartons or goods on a pallet and securing them as one stable unit that forklifts can move. In part-load freight, where cargo is loaded, transferred and unloaded several times, a well-built pallet is the most effective protection against damage. Konsol Logistics handles part-load transport, and good pallet preparation helps your goods arrive in the condition they left in.
How do you build a stable pallet?
Think of the pallet as the base of the shipment, and of the load as a single block.
- Choose a pallet in good condition, with no broken boards or loose nails.
- Pick a standard footprint, such as the widely used 120 x 80 cm or 120 x 100 cm, when your cargo allows.
- Place cartons so that they sit within the pallet edges, because overhang is easily crushed.
- Stack in a tight, interlocking pattern, with the heaviest cartons at the bottom.
- Keep the stack within the height limit set by your carrier, since taller loads are harder to stack and handle.
Corner protectors and stretch wrap
Corner protectors are rigid strips fitted on the vertical edges of the load. They protect the edges of the cartons and allow straps and film to be tightened without cutting into the packaging. Stretch film then holds the whole stack together.
- Wrap from the base of the pallet upwards, so that the film also locks the load to the pallet.
- Overlap the layers and finish with a few extra turns at the top.
- Apply enough tension to hold the load firmly, without crushing the cartons.
- Use straps in addition to film for heavier or tall loads.
Labeling the pallet and the cartons
Part-load cargo passes through terminals where several consignments are sorted, so every unit must be identifiable. Label the pallet on at least two sides, and also label the individual cartons. A damaged or split pallet can then still be matched to its consignment.
- Include consignee name, address and contact details, the piece number and the reference.
- Mark handling instructions such as fragile and this side up.
- Show clearly whether the pallet can be stacked.
- Remove old labels from reused packaging.
Stackability and why it affects cost
A pallet that cannot be stacked occupies floor space that nothing else can use, and many carriers price this space. If your pallet can safely carry weight above it, say so; if it cannot, mark it clearly. Hiding a non-stackable pallet can lead to a correction later.
Key takeaways
- Use a sound pallet, a standard footprint and a tight, interlocking stack.
- Stay within the carrier’s height limit and avoid overhang.
- Corner protectors and stretch film hold the load as one unit.
- Label the pallet and the cartons, and state stackability.
Prepare your pallets with Konsol Logistics
Share your pallet count, dimensions, weight and stackability when you ask for a quote. Fill in the Quick Quote form on the Konsol Logistics website; it checks your details and turns them into a WhatsApp message that you send yourself.
Frequently asked questions
Why label both the pallet and the cartons?
If a pallet is split or a wrap fails, each carton can still be identified and returned to the right consignment.
How tall can a pallet be?
The limit depends on the carrier and the vehicle, so ask for it before packing.
Is stretch wrap enough for heavy loads?
Not always. Heavy or tall loads usually need straps and corner protectors in addition to film.